“Good work, reasonable, prompt AND pleasure to work with. Highly recommended.”
Job: Outlets, GFCIs, meter box and breakers to bring an old house up to code
ML
Marc L.
Philadelphia, PA
Smart Home Integration
Smart Home Wiring and Integration in Philadelphia & the Main Line
Smart switches, dimmers and lighting scenes only feel smart when the wiring behind them is right. We set up the circuits so your lighting control works the first time and keeps working.
Lic. #37352
City of Philadelphia L&I
ICC Certified
Commercial Electrical Inspector
Built to the NEC
Code-compliant installs
5 Service Areas
Philadelphia & the Main Line
Know the Signs
Why Won't My Smart Switch Work?
Most smart switches need a neutral wire to stay powered while the light is off. Older homes often have only a hot wire and a switch leg in the box, with no neutral at all. Since the 2011 edition, NEC 404.2(C) has required a neutral at most switch locations, but homes built before that often lack one. Crowded boxes cause trouble too, because smart switches are deeper than old toggles. And many LED bulbs flicker or buzz on a dimmer they were not matched with. These are wiring problems, not app problems, which is why a factory reset rarely fixes them. Electrical Hazards, Inc. solves the wiring first, then the device.
Common Smart Switch Problems
- No neutral in the switch box
- Switch drops off Wi-Fi
- Three-way switches wired wrong
- Crowded, overfilled boxes
- LED lights flicker on smart dimmers
How We Do It
Smart Devices, Installed Like Real Electrical Work
We start by opening the boxes and checking what wiring is actually there. Where a neutral is missing, we run one or choose a device listed to work without one. For three-way and four-way circuits, we trace the travelers so the smart switch and its companion work together. Smart dimmers get matched to your LED fixtures so they dim smoothly. We also check box fill, because smart switches are deeper than old toggles and need room for safe connections. We hold City of Philadelphia license #37352, so new circuits and wiring changes go through the proper permit steps. You get devices that connect cleanly and stay online.
What We Set Up
- Neutral wires where needed
- Three-way and four-way switching
- Companion switches and remotes
- Box fill and deeper boxes
- Dimmer and LED matching
Why It Pays Off
A Smarter Home Starts at the Panel
Smart devices add convenience, but they also add load and complexity. A good plan looks at the whole home, not one switch at a time. If you plan to add a smart EV charger, a heat pump with a smart thermostat, or whole-home lighting control, we check that your panel and circuits can support it. In many older Philadelphia and Main Line homes, a panel upgrade or a few new circuits make the rest of the smart home work reliably. We wire for the devices you choose, explain how each one connects, and leave the setup simple enough that you can add more later. Start with the switches you use most, and build out from there.
Smart Projects We Wire
- Smart switches and dimmers
- Smart outlets
- Lighting scenes by room
- Whole-home lighting control
- Outdoor lighting on schedules
Want Your Smart Devices to Just Work?
Call Electrical Hazards, Inc. at (267) 977-2106. Tell us which devices you have or want, and we will check your wiring, explain what each one needs, and give you a clear plan and price. Already bought your devices? We can install those too.
Step by Step
How We Wire Your Smart Home
01
Device List
Tell us the switches, dimmers or scenes you want. We check what each one needs.
02
Box & Panel Check
We open the boxes, look for neutrals and C-wires, and confirm panel capacity.
03
Wiring Upgrades
We add neutrals, transformers or circuits so each device has proper power.
04
Install & Connect
We install the devices, confirm they connect and show you how they work.
Why Us
What Makes Our Smart Home Work Different
Smart devices fail most often because of wiring. We fix that part first.
Philadelphia Lic. #37352
ICC Certified Commercial Electrical Inspector on our team
EPA Lead-Safe Certified Firm
NAT-F164781-2 · lead-safe practices in pre-1978 homes
Wiring Before Apps
We solve the power problem before touching the app.
Right Device Choices
We help you pick devices that suit your home's wiring.
Code-Correct Changes
We install new neutrals and circuits to the NEC.
Room to Grow
We plan circuits so you can add devices later.
Services
Smart Home Services
We wire and install the smart devices homeowners ask for most.
Smart Switches & Dimmers
Install smart lighting control with the neutral wires it needs.
Doorbells, Cameras & Thermostats
See our smart device installation service.
Learn moreSmart Outlets
Install smart receptacles for lamps and small appliances.
Whole-Home Lighting Control
Plan scenes and control across several rooms.
Reviews
Homeowner Feedback
“TOTALLY SATISFIED. Great price, work was completed on time and very professional.”
Job: New 220-volt line
S
Sean
Philadelphia, PA
“It's all I was looking for: great price, professional, and done right…”
Job: 220-volt line
S
Sean
Philadelphia, PA · repeat customer
Service Area
Areas We Cover
We wire smart home devices in Philadelphia, Lower Merion, Upper Merion, Wayne and Berwyn, including older homes that need neutral wires added first. Choose your area to learn more about local service and how we plan smart home wiring there.
FAQ
Frequently Asked Questions
Do all smart switches need a neutral wire?
Most do. A few models work without one, but they can cause LED flicker. We check your boxes and suggest the best fit.
Can smart switches work on three-way circuits?
Yes. Most brands sell a companion switch or remote for the second location. We trace the existing wiring so both spots work.
Why do my LED lights flicker on a smart dimmer?
The dimmer and the bulbs are often a poor match. We pick a dimmer listed for your LEDs and adjust its low-end setting.
Can you install devices I already bought?
Yes. We check that each device suits your wiring first, then install it and confirm it connects.
Will smart devices overload my panel?
Switches and dimmers use very little power. Bigger smart loads like EV chargers and heat pumps may need a panel check first.
Request a Callback
Leave your name and number, tell us a little about the job, and one of our electricians will call you back.
- (267) 977-2106
- 145 W Swedesford Rd #1123, Wayne, PA 19087
- Philadelphia Electrical Contractor Lic. #37352
- mal@electrical-hazards.com